Quick Start - On-Premise

The following quick start is for the RMS On-Premise software (RMS-WEB). This quick start is limited due to the fact that the RMS software needs to be installed on the server and as of such is an overview of the required steps be able to start working with the RMS software.

1. Download the RMS software files from the link found in the SLA contract. If you have a PREMIUM SUPPORT SLA, then all software upgrades are included, in which case, please contact [email protected] for the latest version of the software: Version and Change Control.

2. The RMS software files include:

3. Save the RMS software files to your server.

4. Install the software following this guide: Server Software Installation.

5. Once the software is installed and running, devices can be added. The devices will require additional configuration via the RMS-CONFIG Software:

6. Using the RMS-CONFIG software:

7. Add an RMS device to the same network that the RMS-CONFIG software is installed on.

8. Test that the RMS device is setup correctly by clicking on the host and path test.

9. Once the RMS device is setup correctly, add the RMS device to the RMS software: Add a Device.

10. The following resources are available at anytime:

Updated: 20.09.2023.