Adhesive strength on almost all materials such as: plastics and plastic films, metal, wood, stone, ceramics, glass. **Not recommended for PVC surfaces. **
Temperature range: -30...96°C (short time at higher temperatures).
Prepare the surface: prepare the surface of the substrates to achieve optimal bonding. Preparation may require using a detergent or solvent to clean the materials as thoroughly as possible and remove the dust, grease, and oil.
Optimal bonding is obtained at a temperature of at least 20°C. A strong contact pressure is necessary, with a rubberized roller for example.
The adhesive bond can be improved by brief exposure to heat (2 minutes of hot air at 60...80°C).
A load on the bond is recommended after 30 minutes at the earliest, better after at least 2 hours.