Device description¶
General information¶
| Functions | Description |
|---|---|
| Dimensions | 108 x 89.7 x 62.2 mm |
| Housing material | PC (Polycarbonate) |
| Weight | 155 g |
| Power Supply | The module has the following two power supply variants: |
| Interface | The device is operated completely via the LAN interface. |
| Cable length | <3 m min. Cat. 5 |
1 Power supply requirements: 24 VDC ±10 % / >4 W nominal / <15 W limited power source
RMS Digital Output Module¶
The digital output module provides two digital outputs as well as an Ethernet connection for integration into the Rotronic Monitoring System (RMS).
The device provides the following basic functions:
- Two digital output channels
- Relays can be read or set via interface
- Firmware update
Inputs / Outputs¶
The RMS devices have different inputs or outputs. Devices with replaceable probes (E2 connector) automatically detect the measuring parameters of the probe.
The following table lists the main types of RMS devices:
| RMS-LOG-L | Data logger, external probe, LAN |
|---|---|
| RMS-LOG-868 | Data logger, external probe, 868 MHz |
| Temperature Data Loggers | |
| RMS-MLOG-T10-xxx | Data logger, external probe, 1 x NTC, 868 / 915 MHz |
| RMS-LOG-T-xxx | Data logger, internal probe, 1 x NTC, 868 / 915 MHz |
| Analog Input Modules | |
| RMS-MADC-xxx-A | Data logger, 1 x analog input, 868 / 915 MHz , 0(4)…20 mA |
| RMS-MADC-xxx-V | Data logger, 1 x analog input, 868 / 915 MHz , 0…10 V |
| RMS-8ADC-L-R-A | 8 x analog input, LAN, mounting on DIN top hat rail, 0(4)…20 mA |
| Digital Input Modules | |
| RMS-DI-L-R | Data logger, 2 x digital input, LAN, mounting on DIN top hat rail |
| Digital Output Modules | |
| RMS-DO-L-R | 2 x digital output, LAN, mounting on DIN top hat rail |
RTCC (Real Time Clock Calendar)¶
The device has a real time clock calendar. The time is synchronized continuously when connected to the server.
Data Output¶
The outputs are active as soon as the software configuration has been completed.
Following values are saved:
- time stamp
- actual status of the digital outputs
Operating and display elements¶
The device has a button and a multicolored LED for operation and display of the operating state. The button is used during commissioning or for switching the device off in battery operation. The device flashes only if the operating state changes, or if the push-button is pressed briefly. The displayed device state is updated for each event. In order to prolong the operating time in the battery operation, the LED flashing can be deactivated.
| Trigger | Action | LED |
|---|---|---|
| 1 s press | Confirms pairing | n x orange, the indicator flashes while the paring request is running |
| Device status update | ||
| Trigger | Action | LED |
| 1 s press | Shows the current status | 1 x green, measurement & data transmission successful 1 x orange, measurement successful, data transfer failed |
| Automatic | At status change at the relay |