V2.5.2.24169¶
Phase 3 release date: 05.07.2024.¶
Improvements
| ID | Description |
|---|---|
| RMS-4181A | When reviewing a document, the review page is placed at the beginning of the reviewed document and not at the end. The original document will not be modified. |
Bug Fixes
| ID | Description |
|---|---|
| RMS-2759A | Password substitute implemented for all system passwords to ensure that saved passwords are not visible for the user. |
| RMS-2865A | The "Close datagap" link is visible with the data analysis, even if it is already closed. |
| RMS-2896A | When editing a system measuring point device refresh counter, the elements are not populated. |
| RMS-2915A | If an event is inhibited twice, the first inhibition remains open in the audit trail. After the inhibition expires, only the second inhibition is closed. The first inhibition event must then be closed manually. |
| RMS-2920A | When inhibiting an event, the duration is not accurate. |
| RMS-2954A | The E-Mail support system information incomplete: For Rotronic internal use only. |
| RMS-3029A | "Server error" message appears instead of "Access denied" when a user tries to carry out a calibration with the missing user rights. |
| RMS-3120A | When setting the alarm limits to off under the measuring point, the visual of the historical limits disappear from the chart/report. This is only a visual error and does not affect the data integrity of the historical alarm settings. |
| RMS-3121A | The Service manager crashes after 60 minutes. |
| RMS-3155A | PDF report: the limit violation table is empty if the alarm for the measuring point is currently deactivated, even if there are historical limit violations. |
| RMS-3216A | PDF report: the first 3 records are repeated after a page break. |
| RMS-3416A | The last adjustment values for the RMS-ADC-R-L should not be visible. |
| RMS-3433A | The scaling of the RMS-8ADC-L-R gets reset when the RMS-CONVERTER-100 restarts. |
| RMS-3436A | When adding an analogue measuring point and selecting another parameter than “analogue”, the log data cannot be assigned correctly resulting in a datagap. |
| RMS-3438A | A validation error will occur when data is read out from the logger once the data is already validated by the system. |
| RMS-3588A | Service Manager will crash after OutOfMemoryException. |
| RMS-3622A | The E-Mail support system information incomplete: For Rotronic internal use only. |
| RMS-3623A | The last refresh value on the RMS-GW and RMS-CONVERTER-100 devices are disproportionately high. |
| RMS-3624A | Incorrect repetition number in E-Mails and SMS's. |
| RMS-3625A | Incorrect repetition notification interval. |
| RMS-3627A | Translation error in French under inhibition. |
| RMS-3644A | PDF Report: Alarm zone not visible for single measure point. |
| RMS-3645A | PDF Report: Alarm zone no visible (out of range). |
| RMS-3732A | Logfile Error: CloseEventDto. |
| RMS-3758A | PDF Report: the battery levels appear at 255%. |
| RMS-3787A | Exception: Notification KeyNotFoundException. |
| RMS-3900A | The CSV report is empty if first measuring point has no data. |
| RMS-3901A | Retroactive alarms are triggered while inhibited. |
| RMS-3906A | Retroactive sensor error after deleting or archiving a measuring point. |
| RMS-3907A | Data gap closed before all data has been downloaded. |
| RMS-3928A | System measure points selection contains "Tristate button". |
| RMS-3948A | Notification continues after an inhibition. |
| RMS-3960A | Data analysis chart not showing values when the mouse hoovers over. |
| RMS-3977A | MFM920 Telephone call event not closing. |
| RMS-4013A | Cancelling technical alarm inhibition not working. |
| RMS-4015A | PDF Report: the alarm limit is incorrect when negative. |
| RMS-4023A | PDF Report: the wrong measure value count in shown in the data report warnings/alarms. |
| RMS-4028A | An out of limit violation is not detected if the values goes directly from low to high limits. |
| RMS-4038A | Software exception on phone call if provider plugin not selected. |
| RMS-4093A | Calibration report error if documents are not included in the license. |
| RMS-4166A | Alarm action E-Mail: details are incorrect in the audit trail. |
| RMS-4170A | It is not possible to add a new dashboard with Firefox. |
| RMS-4184A | The custom call/SMS provider is not working. |
| RMS-4186A | Wrong value in SMS alarm notification message. |
| RMS-4191A | Measuring data older than the first alarm zone will be analysed using the first alarm zone. In this case false positives can be in the report. |
| RMS-4305A | Readout command and datagap event creation for a device without any active measuring points. |
| RMS-4332A | Data gets restored even when a measuring point is disabled. |
| RMS-4389A | Sending of an alarm finished E-Mail when an alarm finishes before the notification delay time is passed. |
| RMS-4499A | The adjust function doesn’t work when the temperature is set to Fahrenheit (°F). |
| RMS-4506A | User cannot access RMS via the browser. |
| RMS-4515A | Validation function: check send E-Mail event may fail due to a timing issue. |
| RMS-4519A | Mapping report: an incorrect alarm zone is shown in the PDF report charts. |
| RMS-4527A | Calibration: an incorrect calibration report is shown under the measuring point. |
| RMS-4530A | Mapping and Batch Release Report: Duration and chart scale not representing the selected time frame. |
| RMS-4531A | Event report not saved under documents when "send E-Mail" is selected. |
| RMS-4532A | Inhibition: when closing a technical inhibition, the measure inhibition event is also closed. |
| RMS-4537A | Inhibition: when closing a technical inhibition, only the first measuring point of the device is closed. |
| RMS-4675A | If LDAP SyncUser setting is active, the code checks if the RoleId from LDAP is okay even when the SyncRole is not active. |
| RMS-4677A | New PDF reports (Configuration, Mapping, Batch/Release, Report Review) do not support font setting. |
Known Errors
| ID | Description |
|---|---|
| RMS-4536A | Report: if a report exceeds the defined data limits, the report is still created, but the user is not informed that the limit was exceeded. |
| RMS-4706A | Mapping Report: An Unknown Error will occur during export, if the Browser Language uses (comma ",") instead of (period ".") for floating Values e.g (1.2; 3.5) |
| RMS-4825A | "Database error" when opening the alarm table. |
Updated: 21.08.2024.