Overview of the LED alerts on the devices

All Rotronic RMS devices are equipped with LED's to get a status update.

	Trigger	Action	LED
LAN	1 s press	Confirms pairing	n x orange, the LED flashes orange when the pairing demand is open.
Wireless	1 s press	Confirms pairing	1 x orange, the LED flashes orange for each channel searched.
Wireless		Gateway found	n x orange, the LED flashes orange when the pairing demand is open.
Wireless		Confirmed pairing	3 x green
Wireless		Issue pairing (timeout, no data received)	3 x red
	Remove pairing
	Trigger	Action	LED
LAN & Wireless	8 s press	Removes pairing, stops logging, and turns off device	3 x red, the pairing information stored in the logger is deleted.
	Device status update
	Trigger	Action	LED
LAN	1 s press	Shows the current status	1 x green, the connection to the server is good. 2 x red, there is no connection to the server.
Wireless	1 s press	Shows the current status	1 x green, the ISM connection is good. 1 x orange, the measurement is good, no ISM connection. 2 x red, measurement failed.
	Wireless range
	Trigger	Action	LED
	1 s press	Shows the current wireless status	4 x green, RSSI >-30 dBm. 3 x green, RSSI >-60 dBm. 2 x green, RSSI >-80 dBm. 1 x green, RSSI <= -80 dBm.